The Zack VanderBeek inspired 2 Quart rear end fill tank. This is designed with 9" rear ends in mind. When changing 9" gears, everyone knows its a hassle to poor grease in on the back of the rear end, however traditional rear end fill tanks just are not big enough to hold the volume. This 2 quart unit makes quick work of replacing your rear end grease.
This comes standard with a -12 or -16 AN fitting on the can. We recommend always going with a larger line for better flow. See all of our optional/recommended accessories below.
Plumbing Options
(Click the part number to see more about the product)
| PHD-12-ST | -12 AN Straight Push Lock Fitting | ADD |
| PHD-16-ST | -16 AN Straight Push Lock Fitting | ADD |
| PHD-12-45D | -12 AN 45 Degree Push Lock Fitting | ADD |
| PHD-16-45D | -16 AN 45 Degree Push Lock Fitting | ADD |
| PHD-12-90D | -12 AN 90 Degree Push Lock Fitting | ADD |
| PHD-16-90D | -16 AN 90 Degree Push Lock Fitting | ADD |
| PHD-12-180D | -12 AN 180 Degree Push Lock Fitting | ADD |
| PHD-16-180D | -16 AN 180 Degree Push Lock Fitting | ADD |
| AD3015 | -12 AN to 3/4" NPT Straight Fitting | ADD |
| AD3016 | -16 AN to 3/4" NPT Straight Fitting | ADD |
| AD3017 | -16 AN to 1" NPT Straight Fitting | ADD |
| AD36006 | -12 AN Steel Male Weld Fitting | ADD |
| AD36007 | -16 AN Steel Male Weld Fitting | ADD |
| K122-12-5 | Parker 3/4" Push Lock Hose (5 Feet) | ADD |
| K122-16-5 | Parker 1" Push Lock Hose (5 Feet) | ADD |
Mounting Hardware
(Click the part number to see more about the product)
| Part Number | Description | |
| KWM431-100 | Roll Bar Tank Mount (1" Roll Bar) | ADD |
| KWM431-125 | Roll Bar Tank Mount (1.25" Roll Bar) | ADD |
| KWM431-150 | Roll Bar Tank Mount (1.5" Roll Bar) | ADD |
| KWM431-175 | Roll Bar Tank Mount (1.75" Roll Bar) | ADD |
| K126 | Mounting Bolt Kit with Flush Mount Washer | ADD |